The State Select gas water heater reset button is usually located near the thermostat. Press it to reset the heater.
State Select gas water heaters are reliable and efficient, providing consistent hot water. Sometimes, they may encounter issues that require a reset. Knowing how to locate and use the reset button is crucial for homeowners. The reset button is typically found near the thermostat and is essential for troubleshooting.
Pressing this button can often resolve minor issues, restoring your water heater to normal operation. Regular maintenance and understanding these basic troubleshooting steps ensure your water heater functions smoothly, prolonging its lifespan and efficiency. Always consult the user manual for detailed instructions and safety precautions.
Credit: www.whirlpoolwaterheaters.com
Page Contents
Locating The Reset Button
The reset button on a State Select gas water heater is typically located near the thermostat. Ensure the unit is turned off before attempting to reset.
Typical Locations
The reset button is often near the thermostat. It might be behind a small panel. You may need a screwdriver to open the panel. Sometimes, the button is red. Other times, it can be black. Check near the control box too. The button might be on the front or side. Remember, always turn off the power first.
Visual Guide
Look for a small, round button. It can be in different places. Here is a table to help:
| Location | Description |
|---|---|
| Near Thermostat | Usually behind a small panel |
| Near Control Box | Can be on the front or side |
| Inside Control Panel | Requires opening the panel |
Credit: www.mastertechplumbing.com
When To Use The Reset Button
Water is not getting hot. The heater’s light is off. Strange noises come from the heater. There is a smell of gas. The water heater is leaking. These are signs of trouble.
Turn off the power supply. Ensure the area is well-ventilated. Check for gas leaks. Do not touch the heater with wet hands. Keep children away from the heater. Wear protective gloves.
Steps To Reset
Make sure the water heater is turned off. Check if there is no gas leak around. Turn off the gas supply to the heater. Let the heater cool down to avoid burns. Gather your tools like a screwdriver. Ensure the area is well-lit. Keep a flashlight handy for dark spots. Wear protective gloves for safety. Make sure the area is dry and clean.
Locate the reset button on the heater. It’s usually red and near the thermostat. Press and hold the button for 5 seconds. Release the button and wait for a click. Turn on the gas supply again. Set the thermostat to your desired temperature. Turn on the heater and check if it works. If not, repeat the steps once more. Always ensure safety first.
Troubleshooting
Check if the gas supply is on. Ensure the thermostat is set correctly. Inspect the pilot light to see if it is lit. Clean or replace the thermocouple if necessary. Examine the burner for any blockages. Look for any error codes on the unit’s display.
Turn off the gas valve and wait five minutes. Press the reset button firmly for a few seconds. Relight the pilot light following the manufacturer’s instructions. Adjust the thermostat to the desired temperature. Replace the thermocouple if it appears damaged. Clean the burner to remove any debris.
Preventative Maintenance
Regularly pressing the State Select Gas Water Heater reset button ensures optimal performance and prevents unexpected breakdowns. This simple maintenance step extends the heater’s lifespan and improves energy efficiency.
Regular Inspections
Regular inspections help keep your water heater in good shape. Check for leaks around the tank. Inspect the pressure relief valve for proper function. Ensure the thermostat is set correctly. Look for any corrosion on the tank. Check the pilot light to make sure it is on.
Cleaning Tips
Cleaning the water heater is important. Turn off the power before cleaning. Drain the tank to remove sediment. Use a soft brush to clean the exterior. Wipe down the controls with a damp cloth. Make sure to dry all parts thoroughly.
Credit: m.youtube.com
Professional Help
Strange noises from the water heater mean it’s time to call a technician. Leaks around the heater should also be checked by a professional. If you smell gas, turn off the heater and call for help. No hot water after resetting the heater needs expert attention. Frequent trips of the reset button may indicate a serious issue.
Check reviews before picking a service. Ask for certifications and licenses. Ensure they have experience with gas water heaters. Compare prices but don’t choose the cheapest. Look for warranties on their work.
Frequently Asked Questions
Is There A Reset Button On A State Select Water Heater?
Yes, State Select water heaters have a reset button. It is located on the thermostat or control panel.
Why Does My State Select Water Heater Keep Tripping The Reset Button?
Your State Select water heater may trip the reset button due to a faulty thermostat, overheating, or wiring issues. Check for sediment buildup or a malfunctioning element.
Where Is The Pilot Light On A State Select Water Heater?
The pilot light on a State Select water heater is located near the bottom, behind the access panel. Open the panel to see it.
How Do I Restart My Gas Water Heater?
Turn off the gas valve and wait 5 minutes. Relight the pilot light following the manufacturer’s instructions. Turn the gas valve to “On. “
Conclusion
Resetting your State Select gas water heater is simple with our guide. Follow the steps to ensure safety. Regular maintenance can prevent future issues. Keep your water heater running efficiently. For more tips and troubleshooting advice, explore our other blog posts.
Stay warm and worry-free with a reliable water heater.